Back to Tool Photo/Main
Page
Tool Descriptions Below: Metric Tools |
HD Tools |
Misc Tools
|
Metric Tools Descriptions |
|
| DMX™ Fanny Pack Tool Kit (NEW!) | We did our homework, and put together the ultimate off-road tool kit.
A super-tough 5040 denier nylon pouch is ready for just about any
abuse you can through at it, with top-grade hardware and lots of
storage (including a mesh pocket for cash and documents). But the
centerpiece of this kit is tools, and plenty of them. It includes our
PackWrench 3-way wrench, combination wrenches, hex keys, low-range
tire gauge, adjustable wrench, forged tire levers, locking and needle
nose pliers, and much more. With the DMX, you're ready to roll. DMX1 - MOSTLY OFFSHORE TOOLS* |
| PowerDrive™ T-Driver with Socket Set (NEW!) | Have tool set; will travel. The latest addition to our PowerDrive
Sliding T-socket family features a 3/8" drive tip and set of eight
sockets that should take care of just about any operation. Includes 8,
10, 12, 14, and 17mm sockets; 5 and 6mm hex bits; and a #2 Phillips
screwdriver bit, all on a socket clip that attaches to the driver.
Like our critically
acclaimed T-sockets, the sliding "T" gives extra torque when
needed, and a polished chrome finish makes it look like you paid a lot
more than you did. TSDS38 - OFFSHORE PRODUCED |
| PowerDrive™ 1/4" Drive Sliding T-Driver | T-handles are extremely useful for all sorts of applications. And they're even more functional if your existing socket sets are opened up to T-handle usage. Enter the newest member of our family, which has a standard 1/4" drive tip. At about 7", it can be easily carried on your bike, and is likely to become a staple in your tool box as well. Like our other PowerDrive T-handles, the mini driver has our unique sliding "T" feature and a polished chrome finish. |
| OUTBACK'R™ M14 Folding Metric Tool Set | Want lots of functionality in a
small and light package at low cost? Then look no further. The
Outback'r provides 14 tools - four hex keys, two screwdrivers, a
socket driver with 8, 10, and 12mm sockets, 13 and 14mm open-end
wrenches, and three spoke wrenches - all in a nine ounce unit that
measures only 3.5" long. While any tool is in use, the rest remain
folded into the handle which can be used for leverage over a range of
angles. Except for the sockets, all pieces are permanently attached so
there's no need to worry about losing small items. Precision made
using heat-treated chrome vanadium and carbon steel. OM14 - OFFSHORE PRODUCED |
| PowerDrive™ T-Socket Wrenches | Ideal for garage or pit use, our socket wrenches offer a unique sliding "T" handle to allow extra torque or drive fasteners within a limited turning radius. Precision forged, heat-treated sockets and a full polish finish combine to make these the best T-sockets you can get anywhere. Available in 8mm, 10mm, 12mm, and 14mm as a four-piece set. - OFFSHORE PRODUCED |
| PackWrench™ 3-Way Wrench | Many imported vehicles can nearly be stripped and rebuilt with only
three sizes: 8mm, 10mm, and 12mm. The PackWrench provides these sizes
in a compact T-style wrench that's small enough to fit into a fanny
pack or under your seat. It's so handy that it'll be the first tool
you reach for at home, too. Precision heat-treated sockets with a
polished chrome finish. PW1 - OFFSHORE PRODUCED |
| CruzMetrix™ | A no-compromise tool kit for the ultimate enthusiast, with top-grade
polished-chrome wrenches ranging from 8mm to 15mm, an eight-inch
adjustable wrench, genuine Vise-Grip®
locking pliers, seven hex keys, and much more. The Cordura Plus®
pouch with self-healing zippers won't let you down. If second-best
isn't good enough, then the CruzMetrix is for you. CM2 - 100% MADE IN THE USA |
| EconoKIT® M1 | Your vehicle may have come with a tool kit, but with the only virtue
that it was free. The EconoKIT M1 allows a major upgrade in both
quality and content over OEM kits, yet at a very reasonable price.
Four combination wrenches, an eight-inch adjustable wrench, locking
pliers, and much more permit a wide range of operations. The pouch
shares many of the same design principles as our premium kits. EKM1 - MOSTLY OFFSHORE TOOLS* |
| EconoKIT® M2 | An incredible value for the money - high functionality in a quality,
compact pouch at a price well below most replacement OEM tool kits.
Wrenches are forged and heat-treated using modern alloys, supplemented
by four hex keys, a two-in-one spark plug tool, tire pressure gauge,
six-in-one screwdriver that includes an 8mm nut driver, and more. EKM2 - MOSTLY OFFSHORE TOOLS* |
| Folding Metric Hex Key Set | Street and dirt bikes, ATV's, snowmobiles, and watercraft all make
generous use of hex (often called "Allen") fasteners, yet OEM tool
kits seldom include hex wrenches. The FMH1 packs six hex keys - 3mm,
4mm, 5mm, 6mm, 8mm, and 10mm - into a compact unit. They're housed in
a tough composite handle with a cushion grip. Backed by a lifetime
guarantee. FMH1 - 100% MADE IN THE USA |
| MotoWrench™ Metric Multi-Tool | A compact and economical tool kit that fits in your palm! Six wrench
sizes (8mm, 10mm, 12mm, 13mm, 14mm, and 17mm) are provided, as well as
two screwdriver tips, spark plug gap gauge, and bottle opener.
Constructed of rust-resistant stainless steel. MWM1D - OFFSHORE PRODUCED |
|
PackWrench 3-Way wrench |
Many bikes and ATV's could almost be stripped and rebuilt with just three sizes: 8mm, 10mm, 12mm. The PackWrench puts these three socket sizes into a T-style wrench that's small enough to fit in a pack, large enough to provide good leverage. We use ours all of the time. We use it at the motocross track, we carry it off-road in our pack, we take it on street rides - we love it. |
|
RTM 3 Metric Cruiser Kit |
The RoadTech M3 combines two popular CruzTOOLS kits: the road-proven EconoKIT M1 tool kit and MiniSet™ MSM1 ratchet and socket set. It includes four combination wrenches (8, 10, 12, and 14mm), an eight-inch adjustable wrench, locking pliers, tire pressure gauge, three-LED flashlight, four hex keys (3, 4, 5, and 6mm), six-in-one screwdriver, two-in-one spark plug socket, electrical tape, spark plug gap gauge, WD-40, thread locker, mechanic’s wire, and cable ties. The centerpiece of the socket set is a precision 1/4"-drive ratchet with 48 teeth for very small rotational increments, plus three sockets (8, 10, and 12mm) and a two-inch extension. Contents are housed in a tough double panel polyester roll-up pouch. Like other CruzTOOLS products, hand tools are lifetime guaranteed, but more importantly, absolutely dependable when called upon in the middle of nowhere. While the M3 was configured with metric cruisers in mind, it’s equally applicable to all metric bikes. |
| EconoKIT® FR1 | A general-use kit for a wide
range of inch-based vehicles. Includes four combination wrenches, an
eight-inch adjustable wrench, a six-in-one screwdriver with an
additional two-size bit to handle commonly-found square recess
fasteners, locking pliers, tire pressure gauge, and much more. EKFR1 - MOSTLY OFFSHORE TOOLS* |
| Mini Metric Socket Set! | This is the perfect gift, or just the perfect thing to carry in your car or on your bike. Miniature socket kit comes in a plastic case with ratchet and short extension. Includes 8mm, 10mm, 12mm and 13mm sockets. Has 4, 5, and 6mm hex as well as a Phillips bit. We love it! |
|
Tools for Harley Davidson & Buell Descriptions |
|
| Amsport™ | Buell®
Motorcycles combine a classic American V-twin motor with imported
performance components. As a result, a wide assortment of fractional
and metric tools are required. The Amsport meets this need with a
generous supply of wrenches, twelve hex keys, and much more to give
you confidence on those long rides. AMSP3 - 100% MADE IN THE USA |
| EconoKIT® VR1 for V-Rods® (NEW!) | The exciting new V-Rod is touted as a metric bike, which isn't entirely correct. There's still some legacy fractional items, and the Motor Company's beloved Torx fasteners are fully evident. So we designed a kit specifically for your 'Rod that's highly capable using our exclusive PowerDrive wrenches, plus loads of other tools and roadside items - all packaged in a double-panel 600 denier polyester pouch. |
| OUTBACK'R™ H13 Folding Tool Set (NEW!) | Inspired by outdoorsman-style multi-tools, yet designed specifically for Harley-Davidsons, the Outback'r H13 is a powerhouse of functionality. Included are three hex keys (5/32", 3/16", and 1/4"), two Torx keys (T25, T27), slotted and Phillips screwdrivers, a socket driver with 3/8", 7/16", and 1/2" sockets, 10mm box and 9/16" open-end wrenches, plus a spoke wrench. At only 9 ounces and 3.5 inches, you won't have any trouble finding a spot to carry it. Built to last using heat-treated chrome vanadium and carbon steel. |
| The Great American Tool Kit® | Want the most complete, highest-quality tool kit on the planet? Then
this one's for you. A comprehensive assortment of just about
everything you'll need is included, housed in a tough roll-up pouch
made of sixteen-gauge coated vinyl that will fit into most fork bags.
No compromises here. (spark plugs not included) GATK4 - 100% MADE IN THE USA |
| American Teardrop™ | Almost the same contents as the Great American Tool Kit, but in a
pouch that's designed to fit into Softail®
"teardrop" style tool boxes. A generous supply of tools and roadside
items are provided, yet it remains amazingly uncluttered. There's no
need to disrupt the clean lines of your Softail with saddlebags just
to carry tools. ATD2 - 100% MADE IN THE USA |
| Compact American™ | An affordable kit without sacrificing quality or capability, all in a
compact package. The eight-inch adjustable wrench serves double-duty
to handle large fasteners, and as breaker bar for spark plug sockets.
Only about 1.5" thick when zipped up, so you'll hardly notice it in
your saddlebags. CAM2 - 100% MADE IN THE USA |
| American Lite™ | The American Lite provides all-American content at a budget price, yet
still allows the most common mechanical operations. In addition to
typical wrench sizes, a full assortment of hex and Torx®
keys are provided, plus our standard roadside items. The pouch is
constructed of 1000-denier Cordura Plus that's designed for the long
haul. AML2 - 100% MADE IN THE USA |
| EconoKIT® H1 (Updated!) | If you're on a tight budget but still want a complete tool kit,
consider the H1. Five combination wrenches cover most fasteners,
augmented by an eight-inch adjustable wrench that even allows axle
removal. Locking pliers and our standard roadside items can help get
you back on the road. Recently updated with the addition of a 2AA
metal-body flashlight, extra hex and Torx keys, and PowerDrive™
wrenches. The pouch has been fortified for even more durability. EKH1 - MOSTLY OFFSHORE TOOLS |
| EconoKIT® H2 (Updated!) | Bargain-hunters will be delighted with the H2, because considerable
capability is packed into a compact package. Result? Unbeatable value.
The most common fasteners are covered, plus a stout 6-in-1
screwdriver, 2-in-1 spark plug tool, tire pressure gauge, and more.
Updated with extra hex and Torx keys, PowerDrive wrenches, and an
improved pouch design. EKH2 - MOSTLY OFFSHORE TOOLS |
| RoadTech H3 | The H3 combines the road-proven EconoKIT H1 with the best of the MiniSet into this potent new roadside solution. Like the H1, it includes the top-grade PowerDrive™ combination wrenches, an adjustable wrench, locking pliers, LED flashlight, tire gauge, hex and Torx keys, screwdriver and more. But you'll also love the mini ratchet and socket set, making this the last tool kit you'll ever need to buy. |
| Folding Hex and Torx Key Set | Consider it a "Swiss Army Knife" for Harley-Davidsons®.
The FHT1 contains the most commonly required hex and Torx keys forged
from heat-treated nickel alloy steel. They're housed in a tough
composite handle with cushion grip that allows right-angle,
straight-out, and any angle in-between for those hard-to-get-to
fasteners. FHT1 - 100% MADE IN THE USA |
| The Pouch™ | A very rugged roll-up pouch constructed of Ballistics Nylon, with
eighteen pockets of varying width at two heights to accommodate a wide
range of contents. Two lower pockets have a mesh cover with Velcro®
to hold small or loose items in place. A strip of reflective material
is sewn into the back. About 9.5" high by 16" wide when open
(excluding flap). TPOUCH1 - 100% MADE IN THE USA |
| Teardrop Pouch™ | The Teardrop pouch will fit into genuine teardrop tool boxes, yet
store a wide range of tools and other items. Three wrench pockets, a
zip-up mesh pocket, general-use straps, and a velcro-seamed chamber
provide a lot of content flexibility. Constructed of 1000 denier
Cordura Plus®. TD-1 - 100% MADE IN THE USA |
| Mini H-D Socket Set! | This is the perfect gift, or just the perfect thing to carry in your car or on your bike. Miniature socket kit comes in a plastic case with ratchet and short extension. Includes 3/8", 7/16", 1/2", and 10mm sockets. Has 3/16" and 1/4" hex, 25 and 27 torx. We love it! |
|
Misc. Tools Descriptions |
|
| EconoKIT® EL1 Electrical Kit | A cure for the common cold (cold solder joint, that is). Or component
failure, short, open circuit, plus many other electrical problems you
might encounter. The EL1 contains just about everything you need to
troubleshoot and repair electrical failures, made even more useful
with a diagnostic guide by technical guru Kip Woodring. EKEL1 - MOSTLY OFFSHORE CONTENT |
| TirePro™ Universal Tire Repair Kit* NEW! | Road and trailside flats can mean a call to the tow truck. Unless,
that is, you're carrying the TirePro which is equipped for both tube
and tubeless tires. Patches are provided for tube repair (sorry, wheel
and tire removal tools aren't provided - but check out our tool kits),
plus easy and reliable plugs for tubeless tires. A unique valve
complete with hardware lets you use your engine as an unlimited supply
of fresh air, that's adaptable to any combination of cylinders and
most spark plug sizes. TRK1 - MOSTLY OFFSHORE CONTENT |
| OUTBACK'R™ M14 Folding Metric Tool Set | Want lots of functionality in a
small and light package at low cost? Then look no further. The
Outback'r provides 14 tools - four hex keys, two screwdrivers, a
socket driver with 8, 10, and 12mm sockets, 13 and 14mm open-end
wrenches, and three spoke wrenches - all in a nine ounce unit that
measures only 3.5" long. While any tool is in use, the rest remain
folded into the handle which can be used for leverage over a range of
angles. Except for the sockets, all pieces are permanently attached so
there's no need to worry about losing small items. Precision made
using heat-treated chrome vanadium and carbon steel. OM14 - OFFSHORE PRODUCED |
| OUTBACK'R™ H13 Folding Tool Set (NEW!) | Inspired by outdoorsman-style multi-tools, yet designed specifically for Harley-Davidsons, the Outback'r H13 is a powerhouse of functionality. Included are three hex keys (5/32", 3/16", and 1/4"), two Torx keys (T25, T27), slotted and Phillips screwdrivers, a socket driver with 3/8", 7/16", and 1/2" sockets, 10mm box and 9/16" open-end wrenches, plus a spoke wrench. At only 9 ounces and 3.5 inches, you won't have any trouble finding a spot to carry it. Built to last using heat-treated chrome vanadium and carbon steel. |
| EconoKIT® SN1 Universal Snowmobile Kit | Designed to address the most common fastener needs for Arctic Cat®,
Polaris®,
Ski-Doo®,
and Yamaha®
sleds, the SN1 will prepare you not only for your snowmobile, but
virtually any other make you ride with. Both metric and fractional
wrenches and hex keys are provided, plus a wide assortment of other
items. EKSN1 - MOSTLY OFFSHORE TOOLS* |
| 2-Piece Tire Lever Set | Changing tires is about a much fun as painting your house, but having
the right tools can make the job easier. Our new tire levers are
forged and heat-treated using carbon steel alloy. Since they're
forged, they'll flex instead of bending, giving you more confidence.
At 240mm (about 9 inches), they're long enough for leverage but small
enough to fit into most fanny packs. TLS1 - MANUFACTURED OFFSHORE |
| MaxHook™ Spring Puller | We've tried other spring hooks, and they just didn't cut it - either
the hook was too flimsy or we couldn't get enough leverage. The
MaxHook's T-handle provides plenty of leverage. And instead of welding
the hook onto the rod which can become brittle and break, we CNC
machined it right out of the rod stock, then bent it. SH1 - OFFSHORE PRODUCED |
| Triumph® Torx Key Set | New Triumph motorcycles have abandoned Whitworth fasteners in favor of
metric ones. Unlike most other metric vehicles, though, fairly
widespread use of Torx fasteners can be found. Therefore, we've
assembled a selection of Torx keys specific to Triumphs, using the
same top-grade keys found in our other kits. TTORX1 - 100% MADE IN THE USA |
| TirePro Digital Tire Gauge |
|
| FL9L LED Flashlight |
There's nothing worse than being stopped on the
side of a dark road with no light. Whether its needing to see in your
tank bag or look at a map - it's no fun to be stuck in the dark. The
CruzTools LED flashlight will solve all this. Powered by 3 AAA
batteries and enclosed in an aluminum body, the 9 LED lights produce a
bright beam and one that lasts for days. You can't go wrong with this
compact flashlight. We ordered some for the MN bike test crew. (comes
with batteries!)
A great gift! Includes batteries! WE USE IT IN OUR CAR AND ON OUR
TEST BIKES! |
| TirePro Dial Tire Gauge |
|
| MaxHook Spring Hook |
|
Back to Tool Photo (Main)
Page
Tool Descriptions: Metric Tools |
HD Tools |
Misc. Tools
| Hand tools are lifetime warranted against defects in workmanship, when used under normal conditions. The remainder of kit contents carry a one-year warranty from CruzTOOLS, Inc. In the unlikely event that any CruzTOOL item breaks or becomes unusable, simply contact the company for a replacement. CruzTOOLS, Inc., P. O. Box 250, Standard, CA 95373 U.S.A. Phone 209-536-0491, Toll-Free 888-909-8665. Email admin@cruztools.com |
Top Of Page | Home | Street | Cruiser | Off-Road | Snowmobile | ATV
Thanks For Visiting Motorsports-Network.com
Copyright © 2004 by Motorsports Network.
| xxx | |||||||
| Wrenches | 3/8" x 7/16" Open End | ||||||
| 7/16" x 1/2" Open End | |||||||
| 1/2" x 9/16" Open End | |||||||
| 9/16" x 5/8" Open End | |||||||
| 5/8" x 3/4" Open End | |||||||
| 3/8" Combination | |||||||
| 7/16" Combination | |||||||
| 1/2" Combination | |||||||
| 9/16" Combination | |||||||
| 10mm Combination | |||||||
| 8" Adjustable | |||||||
| Hex Keys | "L" Style, # of pieces | ||||||
| Torx Keys | "L" Style, # of pieces | ||||||
| Screwdriver | 6-in-1 Reversible** | ||||||
| Spark Plug* | 5/8" Socket | ||||||
| 13/16" Socket | |||||||
| 2-in-1 Socket + Bar | |||||||
| Gap Gauge | |||||||
| Misc. | Locking Pliers | X | X | X | |||
| 2AA Flashlight | |||||||
| Electrical Tape | X | X | X | X | |||
| WD-40® | X | X | X | X | |||
| Permatex® Threadlocker | X | X | X | ||||
| Cable Ties (5 pcs.) | X | X | X | X | |||
| Mechanics Wire | 36" | 32" | 32" | 32" | 36" | 36" | |
| Vinyl Tubing | 48" |
|
|||||
| Shop Towel | X | X | X | X | |||
| Spare Plug/Tool Straps | X | ||||||
| Tire Pressure Gauge | |||||||
| Pouch | |||||||
| Dimensions | H x W (inches) | 10 x 5 | 10 x 5.5 | 9.5 x 5.5 | 8.5 x 5 | 9.5 x 3 | 9 x 4 |
| Weight | Nearest Half Pound | 4 | 3.5 | 3 | 1.5 | 3 | 1.5 |
*Evolution® and prior engines generally require a 13/16" socket, while Twin-Cam® and Sportster® stock plugs use a 5/8" socket. Use the adjustable wrench as the breaker bar. While the AML-2 doesn't provide a spark plug socket, you can use the 5/8" open end wrench on Sportster and Twin-Cam plugs. Please note that some high-performance aftermarket plugs, such as Screaming Eagle® and Autolite®, require an 18mm socket which can be ordered as an accessory. The EconoKIT two-in-one socket provides 5/8" and 13/16" sizes with its own breaker bar.
**The 6-in-1 screwdriver contains two each slotted and Phillips tips, plus a two-sided nut driver that provides 6mm and 8mm or 1/4" and 5/16" sizes.
|
Tool Kit >>> |
|||||
| Wrenches | 8mm x 10mm Open End | ||||
| 12mm x 13mm Open End | |||||
| 12mm x 14mm Open End | |||||
| 14mm x 15mm Open End | |||||
| 8mm Combination | |||||
| 10mm Combination | |||||
| 12mm Combination | |||||
| 14mm Combination | |||||
| 8" Adjustable | |||||
| PackWrench 3-Way Wrench | |||||
| Hex Keys | "L" Style, # of pieces | ||||
| Screwdriver | 6-in-1 Reversible** | ||||
| Spark Plug* | 2-in-1 Socket + Bar | |
|
|
|
| Gap Gauge | |||||
| Misc. | Locking Pliers | X | X | |
|
| 2AA Metal Body Flashlight | |||||
| Electrical Tape | X | X | |
||
| WD-40® | X | X | |
|
|
| Permatex® Threadlocker | X | ||||
| Needlenose Pliers | |||||
| Cable Ties (5 pcs.) | X | X | |
|
|
| Mechanics Wire | 32" | 36" | 36" | 36" | |
| Shop Towel | X | X | X | |
|
| Plug Socket Straps | X | ||||
| Tire Pressure Gauge | |||||
| Tire Levers | |||||
| Pouch | |||||
| Dimensions | H x W (inches) | 9.5 x 5.5 | 11 x 7 | 9 x 6 | 9 x 4 |
| Weight | Nearest Half Pound | 3 | 4.5 | 2.5 | 1.5 |
| *Spark plug sizes vary among vehicles,
and in many cases, only a special deep-well, thin-wall socket will work.
Therefore, no spark plug sockets are provided with our premium metric
kits. In most kits, however, a strap is provided for a special OEM
socket, or one that can be purchased as an accessory from CruzTOOLS
(we'll be happy to look up the correct size for your vehicle). Use the
8" adjustable wrench as the breaker bar. The two-in-one socket provides
5/8" and 13/16" sizes with its own breaker bar. **The 6-in-1 screwdriver contains two each slotted and Phillips tips, plus a two-sided nut driver that provides 6mm and 8mm or 1/4" and 5/16" sizes. |
| 1.25" Round Patches | |
| 2" Round Patches | |
| Large Oblong Patch | |
| 3.25" Tubeless Insertion Strips (plugs) | |
| Insertion Tool | |
| Thumb Buffer | |
| Pump Valve | |
| 13/16" Plug Pump Adapter | |
| 5/8" Plug Pump Adapter | |
| 18mm Plug Pump Adapter | X |
| 4' Pump Hose | X |
| Rubber Cement | X |
| Lava Hand Soap | X |
| Instructions | X |
| Pouch | |
| Dimensions: H x W (inches) | 8 x 6 |
| Weight:Nearest Half Pound | 0.5 |
| Tools | Wire Crimper/Stripper | |
| Needlenose Pliers | |
|
| 6-in-1 Screwdriver* | |
|
| Electrical Test |
12 Volt Test Light | |
| Pair of 36"
Jumper Test Leads |
|
|
| Crimp Connectors |
Butt 10 - 12 | |
| Butt 14 - 16 | |
|
| Ring 10 - 12, 3/8" | |
|
| Ring 14 - 16, 5/16" | |
|
| Ring 14 - 16, 1/4" | |
|
| Ring 14 - 16, 10 | |
|
| Misc. Non-Shielded Assortment | |
|
| Wire | 14 Gauge Black | |
| 14 Gauge White | |
|
| Misc. | Electrical Tape | X |
| 6" Cable Ties | 5 | |
| 4" Cable Ties | 5 | |
| 5A Fuse | X | |
| 15A Fuse | X | |
| Two-Filament Bulb | X | |
| 1/8" Shrink Tubing | 12" | |
| Troubleshooting Guide | X | |
| Pouch | . | Coated Polyester |
| Dimensions | H x W (inches) | 10 x 5 |
| Weight | Nearest Half Pound | 1.5 |
| Hand tools are lifetime warranted
against defects in workmanship, when used under normal conditions. The
remainder of kit contents carry a one-year warranty from CruzTOOLS, Inc. In the unlikely event that any CruzTOOL item breaks or becomes unusable, simply contact us for a replacement. Your satisfaction is very important to us!
|