HJC AC-12 ELBOWZ & VADER
Carbon Fiber materials are known for their strength, durability and light-weight, that is why HJC has chosen the most technologically advanced Carbon Fiber materials for the new “AC-12 Elbowz and Vader” full-face motorcycle helmet.
> SHELL CONSTRUCTION
Full Application, Carbon fiber shell construction which meets or exceeds SNELL M2005 & DOT standards. The “AC-12 Elbowz and Vader” have true Carbon Fiber composite and resin shell applications. Multiple density channel impact absorbing EPS liner. Large eye port opening for greater visibility. Unique CAD generated shell sculpture with three shell sizes for a more comfortable fit. Bottom edge wind deflector reduces the amount of air to the facial area for additional turbulence reduction.
> VENTILATION
Integrated 3rd generation “ACS” Advanced Channeling Ventilation System. Raised air channels combined with 3 forward intake vents and 5 venturi exhaust vents to create a full front to back airflow flushing heat and humidity up and out of the helmet. Adjustable chin vent re-directs air upwards and across the shield interior keeping moisture out of the face shield area. Side chin bar mounted vortex vents create a low-pressure vacuum effect for increased anti-fogging capacity.
> INTERIOR CONSTRUCTION
Removable AquaTrans® “Open Cell” foam interior. Easily removable liner and cheek pads for cleaning or custom fitting. AquaTrans® liner and cheek pads quickly wicks moisture away from the skin. “Open Cell” technology foam allows for increased internal air circulation. Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap.
> SHIELD MECHANISM
2nd generation 2 stage compression shield closure system. A 2-stage pivot mechanism, compresses the shield into the eye port gasket upon increased speeds, providing an extremely secure seal. Aero-dynamic flush mounted fit for reduced turbulence noise. Anti-fog resistant hard coated 3D shield. Improved, no guess work, tool-less shield removal and installation. Optically correct 3D design. Shield rated to block 95% of UV radiation. Deluxe helmet storage bag included. Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields available.

HJC AC-12 CARBON
Carbon Fiber materials are known for their strength, durability and light-weight, that is why HJC has chosen the most technologically advanced Carbon Fiber materials for the new “AC-12 Carbon” full-face motorcycle helmet.
> SHELL CONSTRUCTION
Full Application, Carbon fiber shell construction which meets or exceeds SNELL M2005 & DOT standards. The “AC-12 Carbon” is a true Carbon Fiber composite and resin shell application. Multiple density channel impact absorbing EPS liner. Large eye port opening for greater visibility. Unique CAD generated shell sculpture with three shell sizes for a more comfortable fit. Bottom edge wind deflector reduces the amount of air to the facial area for additional turbulence reduction.
> VENTILATION
Integrated 3rd generation “ACS” Advanced Channeling Ventilation System. Raised air channels combined with 3 forward intake vents and 5 venturi exhaust vents to create a full front to back airflow flushing heat and humidity up and out of the helmet. Adjustable chin vent re-directs air upwards and across the shield interior keeping moisture out of the face shield area. Side chin bar mounted vortex vents create a low-pressure vacuum effect for increased anti-fogging capacity.
> INTERIOR CONSTRUCTION
Removable AquaTrans® “Open Cell” foam interior. Easily removable liner and cheek pads for cleaning or custom fitting. AquaTrans® liner and cheek pads quickly wicks moisture away from the skin. “Open Cell” technology foam allows for increased internal air circulation. Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap.
> SHIELD MECHANISM
2nd generation 2 stage compression shield closure system. A 2-stage pivot mechanism, compresses the shield into the eye port gasket upon increased speeds, providing an extremely secure seal. Aero-dynamic flush mounted fit for reduced turbulence noise. Anti-fog resistant hard coated 3D shield. Improved, no guess work, tool-less shield removal and installation. Optically correct 3D design. Shield rated to block 95% of UV radiation. Deluxe helmet storage bag included. Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields available.

HJC AC-12 EL DIABLO
The new AC-12 by HJC incorporates racer-tested features such as the Advanced Composite Material (ACM) shell and an Advanced Channeling Ventilation System (ACS) to provide one of the most technologically advanced helmets in its class.
> SHELL CONSTRUCTION
Lightweight “ACM” (Advanced Composite Material) shell construction using an advanced fiberglass & Dyneema® composite weave which meets or exceeds SNELL M2005 & DOT standards. Multiple density channel impact absorbing EPS liner. Large eye port opening for greater visibility. Unique CAD generated shell sculpture with three shell sizes for a more comfortable fit. Bottom edge wind deflector reduces the amount of air to the facial area for additional turbulence reduction.
> VENTILATION
Integrated 3rd generation “ACS” Advanced Channeling Ventilation System. Raised air channels combined with 3 forward intake vents and 5 venturi exhaust vents to create a full front to back airflow flushing heat and humidity up and out of the helmet. Adjustable chin vent re-directs air upwards and across the shield interior keeping moisture out of the face shield area. Side chin bar mounted vortex vents create a low-pressure vacuum effect for increased anti-fogging capacity.
> INTERIOR CONSTRUCTION
Removable AquaTrans® “Open Cell” foam interior. Easily removable liner and cheek pads for cleaning or custom fitting. AquaTrans® liner and cheek pads quickly wicks moisture away from the skin. “Open Cell” technology foam allows for increased internal air circulation.Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap.
> SHIELD MECHANISM
2nd generation 2 stage compression shield closure system. A 2-stage pivot mechanism, compresses the shield into the eye port gasket upon increased speeds, providing an extremely secure seal. Aero-dynamic flush mounted fit for reduced turbulence noise. Anti-fog resistant hard coated 3D shield. Improved, no guess work, tool-less shield removal and installation. Optically correct 3D design. Shield rated to block 95% of UV radiation. Deluxe helmet storage bag included. Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields available.

HJC AC-12 YIKES III
The new AC-12 by HJC incorporates racer-tested features such as the Advanced Composite Material (ACM) shell and an Advanced Channeling Ventilation System (ACS) to provide one of the most technologically advanced helmets in its class.
> SHELL CONSTRUCTION
Lightweight “ACM” (Advanced Composite Material) shell construction using an advanced fiberglass & Dyneema® composite weave which meets or exceeds SNELL M2005 & DOT standards. Multiple density channel impact absorbing EPS liner. Large eye port opening for greater visibility. Unique CAD generated shell sculpture with three shell sizes for a more comfortable fit. Bottom edge wind deflector reduces the amount of air to the facial area for additional turbulence reduction.
> VENTILATION
Integrated 3rd generation “ACS” Advanced Channeling Ventilation System. Raised air channels combined with 3 forward intake vents and 5 venturi exhaust vents to create a full front to back airflow flushing heat and humidity up and out of the helmet. Adjustable chin vent re-directs air upwards and across the shield interior keeping moisture out of the face shield area. Side chin bar mounted vortex vents create a low-pressure vacuum effect for increased anti-fogging capacity.
> INTERIOR CONSTRUCTION
Removable AquaTrans® “Open Cell” foam interior. Easily removable liner and cheek pads for cleaning or custom fitting. AquaTrans® liner and cheek pads quickly wicks moisture away from the skin. “Open Cell” technology foam allows for increased internal air circulation. Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap.
> SHIELD MECHANISM
2nd generation 2 stage compression shield closure system. A 2-stage pivot mechanism, compresses the shield into the eye port gasket upon increased speeds, providing an extremely secure seal. Aero-dynamic flush mounted fit for reduced turbulence noise. Anti-fog resistant hard coated 3D shield. Improved, no guess work, tool-less shield removal and installation. Optically correct 3D design. Shield rated to block 95% of UV radiation. Deluxe helmet storage bag included. Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields available.

HJC AC-12 AXIS
The new AC-12 by HJC incorporates racer-tested features such as the Advanced Composite Material (ACM) shell and an Advanced Channeling Ventilation System (ACS) to provide one of the most technologically advanced helmets in its class.
> SHELL CONSTRUCTION
Lightweight “ACM” (Advanced Composite Material) shell construction using an advanced fiberglass & Dyneema® composite weave which meets or exceeds SNELL M2005 & DOT standards. Multiple density channel impact absorbing EPS liner. Large eye port opening for greater visibility. Unique CAD generated shell sculpture with three shell sizes for a more comfortable fit. Bottom edge wind deflector reduces the amount of air to the facial area for additional turbulence reduction.
> VENTILATION
Integrated 3rd generation “ACS” Advanced Channeling Ventilation System. Raised air channels combined with 3 forward intake vents and 5 venturi exhaust vents to create a full front to back airflow flushing heat and humidity up and out of the helmet. Adjustable chin vent re-directs air upwards and across the shield interior keeping moisture out of the face shield area. Side chin bar mounted vortex vents create a low-pressure vacuum effect for increased anti-fogging capacity.
> INTERIOR CONSTRUCTION
Removable AquaTrans® “Open Cell” foam interior. Easily removable liner and cheek pads for cleaning or custom fitting. AquaTrans® liner and cheek pads quickly wicks moisture away from the skin. “Open Cell” technology foam allows for increased internal air circulation.Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap.
> SHIELD MECHANISM
2nd generation 2 stage compression shield closure system. A 2-stage pivot mechanism, compresses the shield into the eye port gasket upon increased speeds, providing an extremely secure seal. Aero-dynamic flush mounted fit for reduced turbulence noise. Anti-fog resistant hard coated 3D shield. Improved, no guess work, tool-less shield removal and installation. Optically correct 3D design. Shield rated to block 95% of UV radiation. Deluxe helmet storage bag included. Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields available.

HJC AC-12 SOLID, MATTE & METALLIC
The new AC-12 by HJC incorporates racer-tested features such as the Advanced Composite Material (ACM) shell and an Advanced Channeling Ventilation System (ACS) to provide one of the most technologically advanced helmets in its class.
> SHELL CONSTRUCTION
Lightweight “ACM” (Advanced Composite Material) shell construction using an advanced fiberglass & Dyneema® composite weave which meets or exceeds SNELL M2005 & DOT standards. Multiple density channel impact absorbing EPS liner. Large eye port opening for greater visibility. Unique CAD generated shell sculpture with three shell sizes for a more comfortable fit. Bottom edge wind deflector reduces the amount of air to the facial area for additional turbulence reduction.
> VENTILATION
Integrated 3rd generation “ACS” Advanced Channeling Ventilation System. Raised air channels combined with 3 forward intake vents and 5 venturi exhaust vents to create a full front to back airflow flushing heat and humidity up and out of the helmet. Adjustable chin vent re-directs air upwards and across the shield interior keeping moisture out of the face shield area. Side chin bar mounted vortex vents create a low-pressure vacuum effect for increased anti-fogging capacity.
> INTERIOR CONSTRUCTION
Removable AquaTrans® “Open Cell” foam interior. Easily removable liner and cheek pads for cleaning or custom fitting. AquaTrans® liner and cheek pads quickly wicks moisture away from the skin. “Open Cell” technology foam allows for increased internal air circulation. Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap.
> SHIELD MECHANISM
2nd generation 2 stage compression shield closure system. A 2-stage pivot mechanism, compresses the shield into the eye port gasket upon increased speeds, providing an extremely secure seal. Aero-dynamic flush mounted fit for reduced turbulence noise. Anti-fog resistant hard coated 3D shield. Improved, no guess work, tool-less shield removal and installation. Optically correct 3D design. Shield rated to block 95% of UV radiation. Deluxe helmet storage bag included. Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields available.

HJC CL-MAX ELEMENT, SOLID & METALLIC
> SHELL DESIGN
Wind tunnel tested aerodynamic, lightweight shell. Injection molded polycarbonate shell construction. Channeled expanded poly-styrene liner. One-handed operation for easy opening and closing of chin bar/face shield. DOT approved
> VENTILATION
Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow  to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent.
> INTERIOR CONSTRUCTION
Comfortable removable Nylex liner and cheek pads. Optional cheek pad sizes to achieve a “custom fit”. Wrap around neck roll reduces wind noise. Double “D” ring chin strap retention system easily secures excess chin strap length.
> SHIELD MECHANISM
Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal
every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet.
Eyeglass friendly optically correct one-piece design with 95% protection from U.V. rays. Optional RST-mirror and smoke shields available.

HJC CL-SP ANIMUS, PHOENIX & RAVEN
The all new CL-SP full-face polycarbonate composite helmet by HJC features aggressive shell sculpture, innovative features, and comfort. Simply everything you could want in a hyper-sport helmet.
> SHELL CONSTRUCTION
Injection-Molded Polycarbonate Composite Shell Construction which meets or exceeds SNELL M2005 & DOT standards. The lightweight injection molded polycarbonate composite shell is the latest advancement in polycarbonate composite technology. Wind tunnel tested aerodynamic shell shape with an extra large eye port for greater visibility. Channeled, Dual Density EPS (expanded poly styrene) liner. Three shell sizes provide a comfortable fit.
> VENTILATION
Flow-Through “ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity, multi-stage, forehead intake vents. Venturi exhaust spoiler. Anti-Fog System. Side chin bar mounted vortex vents create a low-pressure vacuum effect drawing heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Anti-fog treated 3D shield.
> SHIELD MECHANISM
Next Generation 2 Stage Compression Shield Closure System. A two-stage pivot mechanism, compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no guess work, tool-less shield removal and installation. Aerodynamic flush mounted fit for reduced turbulence. Scratch resistant hard coated shield. Optically superior 3D design. Rated at 95% UV resistant
> INTERIOR CONSTRUCTION
Removable / Washable Bioceramic Nylex® Interior. Anti-bacterial Bioceramic Nylex® liner and cheek pads quickly wick moisture away from the skin and eliminate odor causing bacteria. Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap. Soft Helmet Storage Bag Included. Built-in Communication System Speaker Cavity. • Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields.

HJC CL-SP OSIRIS
The new CL-SP full-face Polycarbonate Composite helmet by HJC features aggressive shell sculpture, innovative features, and comfort. Simply everything you could want in a hyper-sport helmet.
> SHELL CONSTRUCTION
Injection-Molded polycarbonate composite shell construction which meets or exceeds SNELL M2005 & DOT standards. The lightweight injection molded polycarbonate composite shell is the latest advancement in polycarbonate composite technology. Wind tunnel tested aerodynamic shell shape with an extra large eye port for greater visibility. Channeled, Dual Density EPS (expanded poly styrene) liner. Three shell sizes provide a comfortable fit.
> VENTILATION
Flow-Through “ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity, multi-stage, forehead intake vents. Venturi exhaust spoiler. Anti-Fog System. Side chin bar mounted vortex vents create a low-pressure vacuum effect drawing heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Anti-fog treated 3D shield.
> SHIELD MECHANISM
Next Generation 2 Stage Compression Shield Closure System. A two-stage pivot mechanism, compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no guess work, tool-less shield removal and installation. Aerodynamic flush mounted fit for reduced turbulence. Scratch resistant hard coated shield. Optically superior 3D design. Rated at 95% UV resistant
> INTERIOR CONSTRUCTION
Removable / Washable Bioceramic Nylex® Interior. Anti-bacterial Bioceramic Nylex® liner and cheek pads quickly wick moisture away from the skin and eliminate odor causing bacteria. Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap. Soft Helmet Storage Bag Included. Built-in Communication System Speaker Cavity. • Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields.

HJC CL-SP SOLID, MATTE & METALLIC
Thee new CL-SP full-face polycarbonate composite helmet by HJC features aggressive shell sculpture, innovative features, and comfort. Simply everything you could want in a hyper-sport helmet.
> SHELL CONSTRUCTION
Injection-Molded Polycarbonate Composite Shell Construction which meets or exceeds SNELL M2005 & DOT standards. The lightweight injection molded polycarbonate composite shell is the latest advancement in polycarbonate composite technology. Wind tunnel tested aerodynamic shell shape with an extra large eye port for greater visibility. Channeled, Dual Density EPS (expanded poly styrene) liner. Three shell sizes provide a comfortable fit.
> VENTILATION
Flow-Through “ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity, multi-stage, forehead intake vents. Venturi exhaust spoiler. Anti-Fog System. Side chin bar mounted vortex vents create a low-pressure vacuum effect drawing heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Anti-fog treated 3D shield.
> SHIELD MECHANISM
Next Generation 2 Stage Compression Shield Closure System. A two-stage pivot mechanism, compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no guess work, tool-less shield removal and installation. Aerodynamic flush mounted fit for reduced turbulence. Scratch resistant hard coated shield. Optically superior 3D design. Rated at 95% UV resistant
> INTERIOR CONSTRUCTION
Removable / Washable Bioceramic Nylex® Interior. Anti-bacterial Bioceramic Nylex® liner and cheek pads quickly wick moisture away from the skin and eliminate odor causing bacteria. Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap. Soft Helmet Storage Bag Included. Built-in Communication System Speaker Cavity. • Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields.

HJC CL-15 ORBIT
The new CL-15 full-face Polycarbonate Composite helmet by HJC combines protection, comfort and innovative features with exceptional value.
> SHELL CONSTRUCTION
 Injection-Molded polycarbonate composite shell construction which meets or exceeds SNELL M2005 & DOT standards. The lightweight injection molded polycarbonate composite shell is the latest advancement in polycarbonate composite technology. Wind tunnel tested aerodynamic shell shape with an extra large eye port for greater visibility. Channeled, Dual Density EPS (expanded polystyrene) liner. Three shell sizes provide for a comfortable fit.
> VENTILATION
Flow-Through,“ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity, multi-stage, forehead intake vents. 2 rear venturi exhaust vents. Anti-Fog System. Adjustable side chin bar mounted vortex vents create a low-pressure vacuum effect drawing heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Anti-fog treated 3D shield.
> SHIELD MECHANISM
Next Generation 2 Stage Compression Shield Closure System. A two-stage pivot mechanism, compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no guess work, tool-less shield removal and installation. Aerodynamic flush mounted fit for reduced turbulence. Scratch resistant hard coated shield. Optically superior 3D design. Rated at 95% UV resistant
> INTERIOR CONSTRUCTION
Removable / Washable Interior. Removable, washable Nylex cheek pads and comfort liner for cleaning. Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap. Soft Helmet Storage Bag Included. Built-in Communication System Speaker Cavity. Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields.

HJC CL-15 SESSION
The new CL-15 full-face Polycarbonate Composite helmet by HJC combines protection, comfort and innovative features with exceptional value.
> SHELL CONSTRUCTION
 Injection-Molded polycarbonate composite shell construction which meets or exceeds SNELL M2005 & DOT standards. The lightweight injection molded polycarbonate composite shell is the latest advancement in polycarbonate composite technology. Wind tunnel tested aerodynamic shell shape with an extra large eye port for greater visibility. Channeled, Dual Density EPS (expanded polystyrene) liner. Three shell sizes provide for a comfortable fit.
> VENTILATION
Flow-Through “ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity, multi-stage, forehead intake vents. 2 rear venturi exhaust vents. Anti-Fog System. Adjustable side chin bar mounted vortex vents create a low-pressure vacuum effect drawing heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Anti-fog treated 3D shield.
> SHIELD MECHANISM
Next Generation 2 Stage Compression Shield Closure System. A two-stage pivot mechanism, compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no guess work, tool-less shield removal and installation. Aerodynamic flush mounted fit for reduced turbulence. Scratch resistant hard coated shield. Optically superior 3D design. Rated at 95% UV resistant
> INTERIOR CONSTRUCTION
Removable / Washable Interior. Removable, washable Nylex cheek pads and comfort liner for cleaning. Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap. Soft Helmet Storage Bag Included. Built-in Communication System Speaker Cavity. Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields.

HJC CL-15 SOLID & METALLIC
The new CL-15 full-face Polycarbonate Composite helmet by HJC combines protection, comfort and innovative features with exceptional value.
> SHELL CONSTRUCTION
 Injection-Molded polycarbonate composite shell construction which meets or exceeds SNELL M2005 & DOT standards. The lightweight injection molded polycarbonate composite shell is the latest advancement in polycarbonate composite technology. Wind tunnel tested aerodynamic shell shape with an extra large eye port for greater visibility. Channeled, Dual Density EPS (expanded polystyrene) liner. Three shell sizes provide for a comfortable fit.
> VENTILATION
Flow-Through “ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity, multi-stage, forehead intake vents. 2 rear venturi exhaust vents. Anti-Fog System. Adjustable side chin bar mounted vortex vents create a low-pressure vacuum effect drawing heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Anti-fog treated 3D shield.
> SHIELD MECHANISM
Next Generation 2 Stage Compression Shield Closure System. A two-stage pivot mechanism, compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no guess work, tool-less shield removal and installation. Aerodynamic flush mounted fit for reduced turbulence. Scratch resistant hard coated shield. Optically superior 3D design. Rated at 95% UV resistant
> INTERIOR CONSTRUCTION
Removable / Washable Interior. Removable, washable Nylex cheek pads and comfort liner for cleaning. Streamline, wrap-around neck roll reduces wind noise. Padded chin strap design. Nylon strap retention snap neatly secures excess chin strap. Soft Helmet Storage Bag Included. Built-in Communication System Speaker Cavity. Optional Mirrored - RST, high definition (amber), smoke, and tear-off shields.

HJC CS-12 ECHO
> SHELL CONSTRUCTION
Lightweight injection molded polycarbonate construction. Electro-static paint process. Large eye port for greater visibility. Dual density lightweight liner.
> VENTILATION
Flow through ventilation system with adjustable forehead, chin bar, and front lower side vents. Forehead and chin bar vents direct airflow to the left and right rear exhaust vents. Front lower side vents, provide more effective ventilation and defogging. Removable air guide prevents fogging.
> INTERIOR CONSTRUCTION
Built-in neck roll exhaust vent. Comfortable interior lining. Brushed Nylex® interior and cheek pads for maximum absorption. Wrap around neck roll reduces wind noise. Padded chin strap design.
> SHIELD MECHANISM
Aerodynamic flush mounted quick release shield. No screws or tools required for installation or removal. Quick and hassle free shield mounting device. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. D.O.T. approved

HJC CS-12 SOLID & METALLIC
> SHELL CONSTRUCTION
Lightweight injection molded polycarbonate construction. Electro-static paint process. Large eye port for greater visibility. Dual density lightweight liner.
> VENTILATION
Flow through ventilation system with adjustable forehead, chin bar, and front lower side vents. Forehead and chin bar vents direct airflow to the left and right rear exhaust vents. Front lower side vents provide more effective ventilation and defogging. Removable air guide prevents fogging.
> INTERIOR CONSTRUCTION
Built-in neck roll exhaust vent. Comfortable interior lining. Brushed Nylex® interior and cheek pads for maximum absorption. Wrap around neck roll reduces wind noise. Padded chin strap design.
> SHIELD MECHANISM
Aerodynamic flush mounted quick release shield. No screws or tools required for installation or removal. Quick and hassle free shield mounting device. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. D.O.T. approved

HJC AC-3 SOLID, MATTE & METALLIC
> SHELL CONSTRUCTION
Constructed of advanced composite materials. Fiberglass and Dyneema®, Kevlar® shell, provides a lightweight construction with superior strength.
> VENTILATION
Advanced channeling ventilation system features an, adjustable triple intake forehead vent, a dual density styro liner and rear venturi exhaust vents, allowing for a complete flow through cooling system. Comes with visor.
> INTERIOR CONSTRUCTION
Comfortable interior lining made from comfortable Nylex®. Removable and washable interior liner and cheek pads, with easy speaker installation. Optional features; Integrated quick change shield system. Quickly swap out the visor for a single lens or mirrored shield. No tools needed for installation
or removal. SNELL & D.O.T. approved

HJC AC-2M SOLID, MATTE & METALLIC
> SHELL CONSTRUCTION
Lightweight shell design. Fiberglass and Dyneema®, Kevlar® shell, provides a lightweight construction with superior strength.
> VENTILATION
Advanced channeling ventilation system features an adjustable triple intake forehead vent, a dual density styro liner and rear venturi exhaust vents, allowing for a complete flow through cooling system. Comes with visor.
> INTERIOR CONSTRUCTION
 Comfortable interior lining made from comfortable Nylex®. Removable washable interior liner and ear warmer. Ear warmers provide easy speaker installation with sewn-in pockets. Double “D” nylon strap retention band.
D.O.T. approved

HJC CL-31 RACER II & RACER
> SHELL CONSTRUCTION
Constructed of lightweight injection molded polycarbonate. Two shell sizes for a more comfortable fit.
> VENTILATION
Two piece channeled dual density expanded poly-styrene liner for shock absorption and direct channeling air flow. Channeled adjustable forehead vents with venturi rear exhaust vents create a flow-through ventilation system.
> INTERIOR CONSTRUCTION
Comfortable plush brushed Nylon interior with sewn-in crown pad. Nylon strap retention band with double D-ring neatly secures chin strap. Comes with 3 snap black visor, optional 5 snap shields available. SNELL & D.O.T. approved (*3XL DOT approved only).

HJC CL-33 SOLID, MATTE & METALLIC
> SHELL CONSTRUCTION
Constructed of lightweight injection molded polycarbonate. Two shell sizes for a more comfortable fit.
> VENTILATION
Pop-up top and side vents provide a flow-through ventilation.
> SHIELD DESIGN
 Aerodynamic flush mounted quick release shield. Integrated quick change shield system, no tools needed for installation or removal.
> INTERIOR CONSTRUCTION
Comfortable plush brushed Nylon interior with sewn-in crown pad. Nylon strap retention band with double D-ring neatly secures chin strap.
Optional single lens and Mirrored shields available. D.O.T. approved

HJC CL-31 SOLID & METALLIC
Constructed of lightweight injection molded polycarbonate. Two shell sizes for a more comfortable fit.
> VENTILATION
Two piece channeled dual density expanded poly-styrene liner for shock absorption and direct channeling air flow. Channeled adjustable forehead vents with venturi rear exhaust vents create a flow-through ventilation system.
> INTERIOR CONSTRUCTION
Comfortable plush brushed Nylon interior with sewn-in crown pad. Nylon strap retention band with double D-ring neatly secures chin strap. Comes with 3 snap black visor, optional 5 snap shields available.
SNELL & D.O.T. approved (*3XL DOT approved only).

HJC CL-21M GAUGE
> SHELL CONSTRUCTION
Constructed of lightweight injection molded polycarbonate. Two shell sizes for a more comfortable fit.
> VENTILATION
Two piece channeled dual density expanded poly-styrene liner for directed airflow. Adjustable top vent.
> INTERIOR CONSTRUCTION
Comfortable brushed plush Nylon interior with sewn-in crown pad. Removable “zip-out” ear flaps, with built-in speaker pockets. Nylon strap retention band with double D-ring neatly secures chin strap. Comes with 3 snap black visor, optional 3 snap shields available. D.O.T. approved

HJC CL-21M REIGN
SHELL CONSTRUCTION
Constructed of lightweight injection molded polycarbonate. Two shell sizes for a more comfortable fit.
> VENTILATION
Two piece channeled dual density expanded poly-styrene liner for directed airflow. Adjustable top vent.
> INTERIOR CONSTRUCTION
Comfortable brushed plush Nylon interior with sewn-in crown pad. Removable “zip-out” ear flaps, with built-in speaker pockets. Nylon strap retention band with double D-ring neatly secures chin strap. Comes with 3 snap black visor, optional 3 snap shields available. D.O.T. approved

HJC CL-21 FLAME
SHELL CONSTRUCTION
Constructed of lightweight injection molded polycarbonate. Two shell sizes for a more comfortable fit.
> VENTILATION
Two piece channeled dual density expanded poly-styrene liner for directed airflow. Adjustable top vent.
> INTERIOR CONSTRUCTION
Comfortable brushed plush Nylon interior with sewn-in crown pad. Removable “zip-out” ear flaps, with built-in speaker pockets. Nylon strap retention band with double D-ring neatly secures chin strap. Comes with 3 snap black visor, optional 3 snap shields available. D.O.T. approved

HJC CL-21M SOLID, MATTE & METALLIC
> SHELL CONSTRUCTION
Constructed of lightweight injection molded polycarbonate. Two shell sizes for a more comfortable fit.
> VENTILATION
Two piece channeled dual density expanded poly-styrene liner for directed airflow. Adjustable top vent.
> INTERIOR CONSTRUCTION
Comfortable brushed plush Nylon interior with sewn-in crown pad. Removable “zip-out” ear flaps, with built-in speaker pockets. Nylon strap retention band with double D-ring neatly secures chin strap. Comes with 3 snap black visor, optional 3 snap shields available. D.O.T. approved

HJC CS-5 SOLID & METALLIC
> SHELL CONSTRUCTION
Lightweight injection molded polycarbonate.
> VENTILATION
Adjustable forehead vent.
> INTERIOR CONSTRUCTION
Plush brushed nylon interior with sewn-in crown pad. Nylon strap retention band neatly secures chin strap.
SNELL & D.O.T. approved

HJC CS-2M SOLID & METALLIC
SHELL CONSTRUCTION
Constructed of lightweight injection molded polycarbonate.
> VENTILATION
Adjustable forehead vent.
> INTERIOR CONSTRUCTION
 Plush brushed nylon interior with sewn-in crown pad. Removable “
zip-out” ear flaps. Nylon strap retention band neatly secures chin strap.
Three snap, smoke bubble visor. D.O.T. approved

HJC AC-X3 CARBON & TITAN
Carbon Fiber materials are known for their strength, durability and light weight, that is why HJC has chosen the most technologically advanced Carbon Fiber materials for the new "AC-X3 CARBON & TITAN" motocross helmets.
> SHELL CONSTRUCTION
 Super-Lightweight, Full Application, Carbon Fiber Shell Construction exceeding SNELL M2005 and DOT standards. Shell constructed using advanced full coverage Carbon Fiber composite and resins. I-beam chin bar design. Three shell sizes for a more comfortable fit
> VENTILATION
Flow-Through “ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity forehead intake vents and 2 venturi exhaust vents.
> INTERIOR CONSTRUCTION
Removable AquaTrans® “Open Cell” Interior Liner. Easily removable liner and cheek pads for cleaning or custom fitting. AquaTrans® interior material quickly wicks moisture away from the skin. Open Cell technology foam allows for increased internal air circulation. Padded chin strap design.
> AERODYNAMIC VISOR DESIGN
Adjustable 3-screw “Ram-Air” visor with machined aluminum side and plastic center screws. Integrated visor fins to reduce high speed lift. Visor matches helmet graphics. Large eye port opening for greater visibility. Integrated non-slip goggle strap holders on each side of the eye port. Nylon strap retention snap neatly secures excess chin strap. • Deluxe helmet storage bag Included. Throw in a low profile roost deflector and you have a true race ready set-up. SNELL & D.O.T. approved
 
HJC AC-X3 AGENT
The new AC-X3 by HJC incorporates racer-tested features such as the Advanced Composite Material (ACM) shell and an Advanced Channeling Ventilation System (ACS) to provide one of the most technologically advanced helmets in its class.
> SHELL CONSTRUCTION
Super-Lightweight “ACM” Shell Design. “ACM” (Advanced Composite Material) Shell constructed using advanced fiberglass & Dyneema® composite weave exceeding SNELL M2005 and DOT standards. I-beam chin bar design. Three shell sizes for a more comfortable fit.
> VENTILATION
Flow-Through (A),“ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity forehead intake vents and 2 venturi exhaust vents.
> INTERIOR CONSTRUCTION
Removable AquaTrans® “Open Cell” Interior Liner. Easily removable liner and cheek pads for cleaning or custom fitting. AquaTrans® interior material quickly wicks moisture away from the skin. Open Cell technology foam allows for increased internal air circulation. Padded chin strap design.
> AERODYNAMIC VISOR DESIGN
Adjustable 3-screw “Ram-Air” visor with machined aluminum side and plastic center screws. Integrated visor fins to reduce high speed lift. Visor matches helmet graphics. Large eye port opening for greater visibility. Integrated non-slip goggle strap holders on each side of the eye port. Nylon strap retention snap neatly secures excess chin strap. Soft helmet storage bag Included. Throw in a low profile roost deflector, and you have a true race ready set-up. SNELL & D.O.T. approved

HJC AC-X3 OPTION
The new AC-X3 by HJC incorporates racer-tested features such as the Advanced Composite Material (ACM) shell and an Advanced Channeling Ventilation System (ACS) to provide one of the most technologically advanced helmets in its class.
> SHELL CONSTRUCTION
Super-Lightweight “ACM” Shell Design. “ACM” (Advanced Composite Material) Shell constructed using advanced fiberglass & Dyneema® composite weave exceeding SNELL M2005 and DOT standards. I-beam chin bar design. Three shell sizes for a more comfortable fit.
> VENTILATION
Flow-Through “ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity forehead intake vents and 2 venturi exhaust vents.
> INTERIOR CONSTRUCTION
Removable AquaTrans® “Open Cell” Interior Liner. Easily removable liner and cheek pads, for cleaning or custom fitting. AquaTrans® interior material quickly wicks moisture away from the skin. Open Cell technology foam allows for increased internal air circulation. Padded chin strap design.
> AERODYNAMIC VISOR DESIGN
Adjustable 3-screw “Ram-Air” visor with machined aluminum side and plastic center screws. Integrated visor fins to reduce high speed lift. Visor matches helmet graphics. Large eye port opening for greater visibility. Integrated non-slip goggle strap holders on each side of the eye port. Nylon strap retention snap neatly secures excess chin strap. • Soft helmet storage bag Included. Throw in a low profile roost deflector, and you have a true race ready set-up. SNELL & D.O.T. approved
 
HJC CL-X5 N8DAWG III & TAO
The new CLX-5 by HJC is offered in four different shell sizes in order to properly fit a range of riders from size small youth to size triple extra large adults. In addition to the excellent fit, the CLX-5 incorporates the latest innovations in design, ventilation and performance.
> SHELL CONSTRUCTION
Injection-Molded polycarbonate composite shell construction exceeding SNELL M2005 and DOT standards. The lightweight injection molded polycarbonate composite shell is the latest advancement in polycarbonate composite technology. I-beam chin bar design. Three shell sizes provide a more comfortable fit.
> VENTILATION
Flow-Through (A),“ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity forehead intake vents. Venturi exhaust spoiler.
> INTERIOR CONSTRUCTION
Removable / washable Bioceramic Nylex® Interior. Anti-bacterial Bio-ceramic Nylex® liner and cheek pads quickly wick moisture away from the skin and eliminate odor causing bacteria. Padded chin strap design.
> AERODYNAMIC VISOR DESIGN
Aerodynamic Vented Visor. Adjustable 3-screw “Ram-Air” visor with machined aluminum side and plastic center screws. Visor matches helmet graphics. Large eye port opening for greater visibility. Integrated non-slip goggle strap holders on each side of the eye port. Nylon strap retention snap neatly secures excess chin strap. Soft helmet storage bag Included.
 
HJC CL-X5 ARENA
The new CLX-5 by HJC is offered in four different shell sizes in order to properly fit a range of riders from size small youth to size triple extra large adults. In addition to the excellent fit, the CLX-5 incorporates the latest innovations in design, ventilation and performance.
> SHELL CONSTRUCTION
Injection-Molded polycarbonate composite shell construction exceeding SNELL M2005 and DOT standards. The lightweight injection molded polycarbonate composite shell is the latest advancement in polycarbonate composite technology. I-beam chin bar design. Three shell sizes provide a more comfortable fit.
> VENTILATION
Flow-Through “ACS” Advanced Channeling Ventilation System. Dual flow-through channels. 2 high capacity forehead intake vents. Venturi exhaust spoiler.
> INTERIOR CONSTRUCTION
Removable / washable Bioceramic Nylex® Interior. Anti-bacterial Bio-
ceramic Nylex® liner and cheek pads quickly wick moisture away from the skin and eliminate odor causing bacteria. Padded chin strap design.
> AERODYNAMIC VISOR DESIGN
Aerodynamic Vented Visor. Adjustable 3-screw “Ram-Air” visor with machined aluminum side and plastic center screws. Visor matches helmet graphics. Large eye port opening for greater visibility. Integrated non-slip goggle strap holders on each side of the eye port. Nylon strap retention snap neatly secures excess chin strap. Soft helmet storage bag Included.
 
HJC CS-X4 BURN
> SHELL CONSTRUCTION
Lightweight injection-molded polycarbonate shell. I-beam chin bar construction. Two shell sizes provide a more comfortable fit.
> VENTILATION
Next generation interior air flow system. Two forehead vents and two rear venturi exhaust vents create a flow-through system. Flush mounted chin vent.
> INTERIOR CONSTRUCTION
Removable, washable interior. Cheek pads and upper liner are easily removed for cleaning. Perforated nylon liner with mesh trim. Padded chin strap design.
> AERODYNAMIC VISOR DESIGN
New aero-vented visor with matching graphics and adjustable center thumb screw. Aircraft aluminum side screws. Large eye port opening for greater visibility. Eye port holes accommodate any goggle size. Non-slip goggle strap holder. DOT standards

HJC FG-C YOUTH
> SHELL CONSTRUCTION
Lightweight fiberglass construction.
> VENTILATION SYSTEM
Flow through ventilation system with adjustable forehead vent.
> INTERIOR CONSTRUCTION
Comfortable interior lining.
Plush brushed nylon interior with sewn-in crown pad.
Nylon strap retention band neatly secures chin strap.
D.O.T. approved

HJC CL-X5Y YOUTH SOLID
> SHELL CONSTRUCTION
The CL-X5Y is constructed of a lightweight advanced composite polycarbonate shell structure which meets DOT standards. Superior fit and comfort using advanced CAD technology. Channeled dual-density expanded polystryrene shock absorbing liner. The sculptured rear shell profile ensures a level of comfort and helmet stability for any riding style.
 > INTERIOR CONSTRUCTION
To keep you cool, dry, and comfortable, the CL-X5Y combines moisture and odor dissipating Nylex comfort padding. Injection molded filtered aerodynamic chin vent. Interior liner can be removed and washed to keep you helmet looking new and clean.
> VENTILATION
Fourth generation, ACS channeled “flow-thru” ventilation system and “Ram Air” forehead vent intakes design for improved, interior air flow. Raised air channels are combined with a 7 multi-stage venting system that allows front to back airflow flushing heat and humidity out of the helmet.
 > AERODYNAMIC VISOR
Large eye port and maximum range visor design ensuring excellent goggle fit and maximum visiblity. With added shell contour to keep your goggle strap from slipping. Nylon strap retention band with double D-ring and snap to neatly secure chin strap.

HJC CL-X5Y YOUTH N8DAWG III & ARENA
> SHELL CONSTRUCTION
The CL-X5Y is constructed of a lightweight advanced composite polycarbonate shell structure which meets DOT standards. Superior fit and comfort using advanced CAD technology. Channeled dual-density expended poly-stryrene shock absorbing liner. The sculptured rear shell profile ensures a level of comfort and helmet stability for any riding style.
 > INTERIOR CONSTRUCTION
To keep you cool, dry, and comfortable, the CL-X5Y combines moisture and odor dissipating Nylex comfort padding. Injection molded filtered aerodynamic chin vent. Interior liner can be removed and washed to keep you helmet looking new and clean.
> VENTILATION
Fourth generation, ACS channeled “flow-thru” ventilation system and “Ram Air” forehead vent intakes design for improved, interior air flow. Raised air channels are combined with a 7 multi-stage venting system that allows front to back airflow flushing heat and humidity out of the helmet.
> AERODYNAMIC VISOR
Large eye port and maximum range visor design ensuring excellent goggle fit and maximum visiblity. With added shell contour to keep your goggle strap from slipping. Nylon strap retention band with double d-ring and snap to neatly secure chin strap.